Main cause of wear of the screw extruder
The normal wear of the screw and cylinder of the screw extruder mainly occurs in the feeding area and the metering area. The main wear reason is caused by the dry friction between the slice particles and the metal surface, and the wear is reduced.
Screw and cylinder abnormal wear will occur in the screw knot and foreign body stuck, ring refers to the screw condensation material, if the screw extruder lack of good protection device, powerful driving force may twist the screw, stuck will produce extraordinary huge resistance, causing serious damage on the surface of the screw and barrel serious scratches, barrel scratch is difficult to repair.
From the design principle, the service life of the cylinder is longer than the screw. For the normal wear of the cylinder, it is generally no longer repaired. The method of repairing the screw thread is often used to restore the radial clearance between the inner hole of the cylinder and the outer diameter of the screw.
Solution to screw wear
The local damage of screw thread is repaired by overwelding special abrasion anticorrosion alloy. Inert gas protective welding and plasma argon arc welding are generally used, and metal spraying technology can also be used for repair.
First, the surface of the worn screw is ground to a depth of about 1. 5 mm, and then the alloy layer is welded to sufficient size to ensure sufficient processing allowance. Finally, the outer size of the outer circle of the screw and the side of the screw to the screw are the original size.
引自-沈兵.螺杆挤出机的维护保养要点[J].聚酯工业,2011,24(06):49-51.
