Conical twin-screw installation
Conical twin-screw installation Conical double screw to install bite together of the conical twin-screw see below. The installation of conical twin-screws and parallel twin-screws is not quite the same. Since the conical twin-screw has a taper, it can only be installed from the back of the screw barrel. First, remove the special tool for the […]
Disassembly and Assembly Process of the Screw
Disassembly and Assembly Process of the Screw (1)Open the machine head and extrude the material in the extruder. After the material is completely extruded, keep the screw idling for at least 5 minutes to prevent residual material inside the screw from affecting screw removal. (2)Remove the pressure sensor from the machine head and open the […]
